Miniature pieze-electric accelerometer
|
A three variant range of low mass (2gm.) accelerometers, each with KONIC sensing element, welded construction, miniature (3.5mm thd.) side or top entry coaxial connector, and titanium case. The two adhesive mount versions (A/24/E, A/24/TE), are provided with bonded isolation discs to minimise ground loop interference, whilst the top entry connector version (A/24/TS) is also available with integral mounting stud but without isolation.
APPLICATIONS
Modal analysis, high level vibration to
5,000g, shock to 10,000g.
For high level measurements, top entry
connector versions are preferred.
OPTIONS
- wideband temperature calibration
-50/+200°C (A/24/E, A24/TE) -50/+250°C (A/24/TS)
| CONVERSION MODE | KONIC |
| Charge sensitivity pC/g | 3/6 |
| Capacitance pF | 600/900 |
| Resonant frequency kHz | 70 |
| Cross azis error % max | 5 |
| Temperature range oC | -50/ + 250 A/24/TS -50/ + 200 A/24/E, A/24/E |
| Insulation Resistance, ohms | > 10 o |
| Pyro-electric output, g/oC | 0.15 |
| Pyro-electric corner freq. Hz | 0.005 |
| Base strain sens. g/µ strain | <0.01 |
| Max continuous accn.g sine | 5000 |
| Max shock g pk., rise time µ sec | 10000,30 |
| Case material | titanium |
| Mounting | flat base, adhesive A/24/E, A/24/TE M4 x 5mm, integral stud A/24/TS |
| Weight gm | 2.1 A/24/TS 2.0 A/24/E, A/24/TE |
| Connector | KP connector (3.5 mm thd.) |
| Mounting torque Nm | 1 |
| Case seal | welded |